Siemens Error E18 or F18: Drain Blockage

E18/F18 on Siemens appliances is associated with a blocked drain filter or hose. Cleaning depends on the access provided for in the manual for your E-Nr.

Check the drain and remaining water

The E18/F18 code is listed in the manufacturer’s documentation. Check the hose without moving the appliance abruptly: a kink or a blocked trap can prevent drainage. If the appliance was recently installed, compare the height and connection with the installation diagram.

Empty before cleaning

Switch off and safely disconnect the appliance, let the water cool, and have a container ready. Use the drain hose or gradually open the filter as described in the manual. Don’t remove the plug completely while water is still waiting to drain.

Once empty, clean any accessible debris and refit the filter, making sure it is seated properly and closed. Check any connections you touched to ensure that clearing the blockage hasn’t caused a leak. See pump filter maintenance if you need help preparing for this task.

If there’s no user-accessible opening or the code returns when the drain path is clear, request service. Hearing the pump run doesn’t prove that it’s moving enough water, and the error alone doesn’t mean the pump needs to be replaced.

Note whether the water drains normally after cleaning or remains at the same level.

View all articles in Siemens washing machine error codes and warnings