Error E18 or F18 in Siemens: drainage blocked

E18/F18 in Siemens is associated with a blocked drain filter or hose. Cleaning depends on the access provided for in the manual for your E-Nr.

Check the outlet and wastewater

The E18/F18 code pair is listed in the manufacturer’s documentation. Check the hose without moving the appliance abruptly: a kinked hose or a blocked siphon can prevent drainage. If the installation is recent, compare the height and connection with the installation diagram.

Drain before cleaning

Switch off and safely disconnect the appliance, allow the water to cool and keep a container ready. Use the drain hose or gradually open the filter as described in the manual. Do not remove the plug completely while water is still waiting to drain.

Once empty, clean any accessible debris and refit the filter, ensuring its seat is clean and closed. Check any connections you touched to make sure clearing the blockage has not caused a leak. See how to maintain the pump filter if you need to prepare for this task.

If there is no user access, or the code returns even when the drainage path is clear, request assistance. Hearing the pump run does not prove that it is pumping enough water, and the error alone does not mean that it needs to be replaced.

Note whether the water drains normally after cleaning or whether the same amount remains.

View all articles in Siemens washing machine error codes and warnings