
Your Samsung model determines what the code means. dC, 3E and some BE2/8E2 readings have different interpretations depending on the model; a single table could lead you to the wrong check.
Keep a record of what the display shows
Photograph the letters, numbers, spaces and suffixes before restarting. On machines with multiple drums, a prefix may identify the affected unit. A flashing light can also indicate an option or a normal status: record the full set of indicators and what stopped working.
The Samsung USA table covers several platforms. Start with the rating plate and the manual for your market; AddWash, FlexWash and automatic dispensing are not available on every Samsung model.
Choose the guidance that matches the complete message
- 4C/4E/nF points to filling, while 5C/5E/nd points to draining; they are not equivalent problems just because both involve water.
- LC and the level or leak-detection family require you to distinguish moisture from detection; OC/OE indicates excess water.
- Resolve the ambiguity of dC first. The main door and the AddWash door have different troubleshooting steps.
- 3E may relate to the motor or the power supply. BE2/8E2 also requires checking the manual to distinguish a stuck button from the MEMS sensor.
Statuses that should not be dismissed as a fault
Ur appears during an attempt to rebalance. Cb/C6 identifies calibration of the load-detection system: follow the manual’s procedure with the drum empty. dn indicates an update download, during which you should not repeatedly switch the machine off just because the display is unresponsive.
Frequently Asked Questions
Does dC indicate a door problem or an imbalance?
It depends on the model. Samsung documents dC for both door closure and imbalance; the manual’s definition determines which check is relevant.
Why does 3E have more than one meaning?
Because Samsung uses this code on different platforms: some assign it to the motor, while others assign it to the power supply. The display looking similar or the timing of the fault is not enough to tell which applies.
Is Ur a fault?
On its own, Ur indicates an attempt to rebalance and may extend the cycle. If the machine eventually stops or repeats the message continuously, check the load and the behaviour described in its manual.
What should I do if the code is not on the list?
Do not assume it is the code that looks most similar. Record every character and find the manual for your model; if the code is not listed there either, contact support with the complete message.
If the manual does not explain the message, provide a photo of it and the full model number; the stage at which it appears is useful, but does not replace the machine-specific table.




