Error 4C / 4E / nF on Samsung washing machines: water not filling

4C, 4E and nF indicate that filling is not working correctly on the Samsung models documented. Check the water supply and the inlet configuration actually used by your model.

The Samsung USA table groups these codes together. Some platforms add a prefix; keep it visible in the photo of the control panel.

Check the water inlet before assuming there is a fault

Check the washing machine’s own tap, for any supply interruptions and for crushed hoses. On a model with hot and cold water inlets, check the connections against the labels; on one designed for a single inlet, do not add a second connection based on a US table.

If the manual allows you to check the inlet screens, turn off the taps and disconnect the power before dismantling the specified connections. Do not permanently remove safety filters to increase the flow rate.

If water enters and drains away at the same time, check the drain installation against the manual. Siphoning can prevent the water from reaching the required level even when the inlet is not closed. If the external water supply and installation are correct and 4C appears again, request a diagnosis; the message does not prove that a valve is faulty.

If the alarm shown is 4C2, note that final number too: it relates to a different query about the inlet water temperature.

View all articles in Samsung washing machine error codes and warnings