LC / LC1 / LE / 1C / 1E error on Samsung washing machines: water level or leak warning

LC, LC1, LE, 1C and 1E are grouped as water level or leak signals in Samsung USA support. Your model’s manual should clarify the definition before you attribute the warning to a cause.

The official grouping includes moisture detection and sensor problems. It does not mean that every one of these codes confirms a leak on all Samsung machines.

If you can see water outside the system

Stop using the machine and turn off the water supply from a safe location. Do not touch wet electrical connections. Once the power has been safely isolated, inspect the external hoses and connections without tilting the machine to drain water from its base.

If you cannot see a leak

Check the detergent and the amount used, and note whether there was a lot of foam. This provides context, but does not confirm that the detergent dosage is the only cause. Water inside the machine may not be visible from outside, and diagnosis may be needed.

Do not dismantle trays or bypass sensors to make the alarm disappear. If the manual allows a recovery routine when there is no active leak, follow its instructions; if the message returns, arrange an inspection. The OC overfill code relates to a different check and should not replace checking the code shown on your machine.

Report the complete code and whether there was moisture, foam or a rising water level; do not summarise all these situations as a ‘water error’.

View all articles in Samsung washing machine error codes and warnings