4C2, 4E2 and nF1 are associated with water that is too hot at the cold inlet on the documented Samsung models. Check which inlets the hoses are connected to before investigating the internal heater.
The Samsung USA table associates this error family with hot and cold connections being swapped. CE and 14C2 also appear in that table, but these codes should not be assumed to apply in every market.
Check where each connection leads
If the problem started after installing or moving the washing machine, check the labels on its inlets and where the hoses lead. Identify which water supply reaches the cold inlet; do not rely solely on the colour of a hose that may have been replaced.
To correct this, switch off the appliance and turn off the water supplies. Do not loosen a connection while it is hot or under pressure. If you cannot identify the taps with certainty, or the installation requires plumbing work, ask the installer to do it.
This alarm is different from 4C, which indicates a filling problem, and from a heater error. If the connections match the exact diagram and the warning persists, give support the model reference and details of the installation.
Do not swap the hoses as a test: first confirm which supply is cold and what the appliance manual requires.
View all articles in Samsung washing machine error codes and warnings
