tC / tE / tE1 error on Samsung washing machines: temperature sensor

tC, tE and tE1 relate to temperature detection on the Samsung models documented. They differ from HC/HE heating-element errors and do not justify replacing a heating element as a process of elimination.

The association is listed in the Samsung USA table. Keep the final number where present; do not reduce every message to “tE”.

What to check when it stops

Note the programme, the selected temperature and whether the warning appeared during washing or drying. If the door remains locked, do not force it open or touch the glass to estimate the temperature: hot water may remain inside.

Follow the recovery procedure allowed by the manual for your model. If the message returns, stop starting new cycles to check whether it heats. A cold programme does not prove that the heating circuit is in good condition either.

Diagnosis may require checks of the sensor, connections and control system; these measurements should be carried out by a technician. A lack of heat without a code and an HC/HE message follow a different diagnostic path, so it is best to keep an exact record of what appeared.

When arranging an inspection, provide the complete code and the programme it occurred on, without carrying out any further temperature tests.

View all articles in Samsung washing machine error codes and warnings