OC / OE / 0C / 0E error on Samsung washing machines: too much water

OC, OE, 0C and 0E indicate too much water on the documented Samsung models. If the water level rises or the machine overflows, stop the water supply and avoid running any more test cycles.

The Samsung USA table lists variants with both O and zero. On machines with multiple drums, an additional prefix may appear: make a note of it too.

Check the water level without triggering another alarm

If you can see that water is still entering the machine, turn off the water supply if you can do so safely. Note whether this happened during a programme or while the machine was stopped. Do not turn the tap back on to demonstrate what happens.

If there is water near sockets or wiring, avoid touching it and isolate the power from a dry, safe location, or call for help. Do not force the door open to remove clothes from a full drum.

The warning may require checks of the water inlet, detection system and controls. A water level that appears to have fallen does not prove that the cause has been fixed, and the code does not mean that a valve must be replaced. If the warning reappears or you cannot control the water filling, stop using the appliance and arrange for assistance.

The LC family of water-level or leak codes is interpreted separately; similar letters do not make the two groups equivalent.

Keep a record of the affected unit and how the water level changes, so the inspection is not based solely on the text shown on the display.

View all articles in Samsung washing machine error codes and warnings