
Your Samsung model number determines what the code means. dC, 3E and some BE2/8E2 readings have different interpretations depending on the model; a single chart could lead you to the wrong check.
Keep a record of what the display shows
Photograph the letters, numbers, spaces and suffixes before restarting. On machines with multiple drums, a prefix may identify the affected unit. A flashing light may also indicate an option or normal status: record the full set of indicators and what stopped working.
The Samsung USA chart covers several platforms. Start with the rating plate and the manual for your market; AddWash, FlexWash and automatic dosing aren't available on every Samsung washer.
Choose the troubleshooting guide that matches the full message
- 4C/4E/nF points to filling, while 5C/5E/nd points to draining; these aren't equivalent problems just because they both involve water.
- LC and the water-level or leak code family require distinguishing moisture from detection; OC/OE indicates excess water.
- Resolve the ambiguity of dC first. The main door and the AddWash door have different troubleshooting steps.
- 3E may relate to the motor or power supply. BE2/8E2 also requires checking the manual to distinguish a stuck button from a MEMS sensor issue.
Statuses that shouldn't be dismissed as faults
Ur indicates a balance retry. Cb/C6 identifies calibration of load detection: follow the manual's installation instructions with the drum empty. dn indicates a software update download, during which you shouldn't repeatedly turn the machine off if the display doesn't respond.
Frequently Asked Questions
Does dC indicate a door issue or an unbalanced load?
It depends on the model. Samsung documents dC as referring to both door closure and an unbalanced load; the manual's definition determines which check applies.
Why does 3E have more than one meaning?
Because Samsung uses that code on different platforms: some assign it to the motor and others to the power supply. The display looking similar or the timing of the fault isn't enough to choose.
Is Ur a fault?
On its own, Ur indicates a balance retry and may extend the cycle. If the machine eventually stops or keeps repeating the message, check the load and the behaviour described in its manual.
What should I do if the code isn't on the list?
Don't substitute the code that looks most similar. Record every character and find the manual for your model; if the code isn't there either, contact support with the full message.
If the manual doesn't explain the message, provide a photo and the full model number; the stage at which it appears can help, but it doesn't replace the machine's code chart.




