Miele washing machine error codes and messages

Miele washing machine error codes and messages

Miele messages distinguish between water intake, drainage, door locking, heating, hygiene and TwinDos. The full message and appliance generation determine which steps to follow.

Water entering, circulating or draining

F10 points to the water supply; F11, to drainage. F210 or Check filter + nozzle relates to wash-water recirculation: it should not be confused with a simple slow drain.

For F138 and Waterproof, deal with an internal leak and water in the base tray. F220 requires a specific approach because Miele documents it as indicating both a leak and an incorrect display on certain appliances. Do not assume that updating the software will resolve every water-related message.

Door locking and programme operation

F34 or Door lock concerns failure to lock; F35 or Door release, failure to unlock. On compatible top-loading models, the drum as well as the lid may be involved. Before trying to access trapped laundry, check the water, temperature and that movement has stopped.

F20 or Heating fault requires you to distinguish a heating problem from the Thermostop pause. F56 may occur alongside a slow final spin and excess foam, while F16 points to a check of the detergent dispensing.

Hygiene and automatic dispensing

F92 and Hygiene Info point to maintenance permitted for the model. With TwinDos, distinguish between product not being used and cartridge not recognised. Barcode recognition on the W2 generation does not describe all earlier systems.

Copy the rating plate details and any additional text on the control panel before contacting support. Instructions for washing machines and washer-dryers are interchangeable only when the manufacturer confirms that they apply.

Frequently Asked Questions

Where can I find the full model details of my Miele washing machine?

Check the rating plate and note the model, type and serial number shown on it. Its position depends on the design; use the identification section of the manual to find it without dismantling anything.

Does the same code mean the same thing on all its washing machines?

It can vary between generations and appliance types. In particular, TwinDos W2 instructions and guidance on the drum door lock of a top-loader should not be applied to every Miele appliance.

How can I tell a normal message from a fault?

Hygiene Info usually indicates that maintenance is needed, whereas a Waterproof message requires attention to a possible leak. The full message on the control panel and the manual can help distinguish a reminder or pause from a fault.

Does clearing the code confirm that the problem is fixed?

No. An apparent fix may clear the message without removing foam, a blockage or a leak. If it appears again, tell the service team what happened after the one permitted retry.

What information should I give the service team?

Provide the rating plate details, the code and any additional text, as well as the programme and stage. For TwinDos, say which cartridge is recognised and which product is not being used; for a leak, say where the water appears.

A need for cleaning does not authorise the use of products or programmes not specified in the manual.