Miele F138 error: Waterproof activated

F138 on a Miele indicates that Waterproof has been activated because of water in the bottom tray. Turn off the water supply and arrange for the leak to be inspected.

Stop the water supply and isolate the machine safely

The manufacturer's documentation links F138 to an internal leak. Turn off the tap if you can reach it from a dry area. Disconnect the machine using the designated means only if it is safe to do so; if there is water near electrical connections, ask for help without touching the plug or crossing the puddle.

The pump running continuously may be part of the protection system. Make a note if you hear it, but do not keep the machine running to check how long it takes to stop.

Trapped laundry and water inside the machine

Miele advises that draining water from the base and carrying out repairs should be left to its service team. Do not tilt the machine or open panels to dry it and clear the warning. If you need to retrieve laundry, use only the emergency procedure in the manual, and only when the specified conditions for cold water, a safe water level, disconnection and a stationary drum have been confirmed.

From outside the machine, note where the water is and at what stage it appeared. The leak-location guide can help you describe these observations; identifying the source inside the machine requires a diagnosis.

The fact that no water is visible on the floor does not confirm that Waterproof was activated for a cause that has since been resolved.

View all articles in Miele washing machine error codes and messages