Miele TwinDos does not recognise a cartridge

In the Miele W2 generation, a TwinDos cartridge may not be recognised if the barcode read by the appliance is missing. Check the generation before following this procedure.

Recognition comes before consumption

The manufacturer's documentation explicitly refers to W2. If the cartridge is accepted but the detergent is not used up, the issue follows a different path; do not alter its label in an attempt to change the dosage.

Visually check the newly fitted cartridge and whether it is compatible with your washing machine's system. Keep the packaging and note the exact message shown on the display. An illegible or missing code does not prove that the machine's reader is faulty.

Set the product reference on a compatible W2

The official help instructions allow you to go to Settings, Appliance functions and TwinDos; select the compartment and the reference for medium soiling, then enter the dosage amount. This amount is taken from the packaging for the load and reference water hardness specified for the model, not from a generic figure for all detergents.

If your display does not follow this sequence, consult the manual for the relevant generation. If recognition repeatedly fails, contact Miele with the model and cartridge details. Do not tamper with labels or force the compartments.

Setting a reference dosage does not authorise the use of an incompatible cartridge.

View all articles in Miele washing machine error codes and messages