F210 or Check filter + nozzle on Miele affects the circulation of soapy water. Check the accessible nozzle on the door seal and the filters intended for user maintenance.
First, the upper nozzle
The manufacturer’s documentation identifies a possible build-up of fluff in the nozzle at the top of the door seal. With the appliance stopped and the door open normally, remove only accessible surface fluff, as instructed in the manual. Do not insert wires or dismantle the duct.
Drain first before checking the filters
If the manual says to check the filters, switch off and safely disconnect the appliance, then wait for the water to cool. Place a container underneath and open the filter access gradually as instructed; do not remove the filter completely while water is still flowing out.
Then remove any accessible debris, put each filter back in its correct position and tighten the closure properly. Incorrect refitting can cause a leak. See the filter section of the manual for your model for instructions on draining the appliance.
F210 is not the same as F11: this error concerns the internal circulation of soapy water, although some maintenance checks may be the same. If the permitted cleaning does not clear the message, request assistance without opening the recirculation circuit.
Say whether you found fluff in the nozzle or debris in the filters; these are different observations.
View all articles in Miele washing machine error codes and messages
