Miele F20 or Heating fault: heating problem

Miele F20 or Heating fault affects heating. The Thermostop pause may stop the timer until the required temperature is reached, but a persistent error needs to be checked.

Timer stopped or fault displayed

The manufacturer’s documentation explains that Thermostop keeps the programme on hold if the required temperature has not yet been reached; the countdown resumes once it is. Note whether only the timer stops or F20/Heating fault is explicitly displayed.

Record the programme, selected temperature and the stage at which it stops. The feel of the door glass or the final temperature of the laundry does not, on its own, show how the water heated during the wash.

A limited reset

For this technical fault, the support information consulted says to disconnect the appliance from the power supply, wait at least two minutes and then select the programme again. Only do this if you can access the electrical connection safely and without getting it wet, and check that the procedure applies to your model’s manual.

If the warning returns, stop trying to restart it and request a service visit. Do not switch to cold washes to keep using an appliance with a persistent error, or take internal measurements or bridge thermostats. The electricity and heating guide can help you describe the related symptoms.

The diagnosis should confirm the cause of the heating problem; F20 does not mean that a specific heating element must be replaced.

View all articles in Miele washing machine error codes and messages