F35 or Door release means that the door lock won’t release on compatible Miele models. It may affect the door or the drum of a top-loader; don’t force it open to get the washing out.
Distinguishing a normal wait from a release error
The manufacturer’s documentation identifies this as an inability to unlock. Check whether the programme has finished, whether water is trapped inside and whether the drum has come to a complete stop. Don’t interpret every brief delay in opening as F35 if the control panel doesn’t display it.
Permitted recovery and access to the washing
The support information consulted recommends disconnecting the appliance from the mains for at least two minutes and then switching it back on. Only do this using a dry, accessible socket and following the procedure confirmed for your model.
If the message persists, request assistance. To retrieve the washing, Miele refers you to the emergency opening procedure in the appliance instructions: its location and mechanism vary. Before using it, the specified conditions for water, temperature, disconnection and movement must be met. If you can’t verify them, wait for a technician.
The guide to doors and locks explains these checks to make beforehand. Don’t insert tools next to the latch based on an image of a different washing machine.
Say whether F35 appeared at the end of a programme, when cancelling it or after a power cut.
View all articles in Miele washing machine error codes and messages
