The washing machine gives you an electric shock when you touch it

An electric shock or tingling sensation when touching the washing machine means you must stop using it and avoid further contact. Don’t test it again with your hand or dismiss it as static electricity.

Isolate the power from a safe position

Keep other people and animals away. If there’s water on the floor, don’t step into it or reach for the plug behind the appliance. Turn off the power from a dry, safe location if you can; otherwise, get help to isolate the electrical installation.

If someone has received an electric shock, seek medical advice. If they lose consciousness, have burns or difficulty breathing, or show other serious symptoms, contact emergency services. Don’t touch someone who is still in contact with a live electrical source, as explained in the St John Ambulance first aid guide.

What a professional should investigate

They should check the appliance’s insulation, protective conductor, connection and the operation of applicable safety devices. The fact that a residual-current device hasn’t tripped doesn’t guarantee there’s no risk. Nor does a plug that looks fine prove that the protective connection is effective.

Tell them where the contact occurred, whether the floor was wet, what stage of the wash cycle the machine was at, and whether a safety device tripped. Report any observed leakage without trying to reproduce it.

Don’t improvise a ground connection

Connecting the casing to a pipe, reversing the plug or wearing footwear so you can keep doing laundry isn’t a repair. The electrical installation must be checked using professional instruments and procedures.

Keep the appliance out of service until the cause has been identified and corrected. The fact that the tingling sensation has stopped doesn’t mean it’s safe.

View all articles in Electrical and heating faults in washing machines