E20/E21/C2 on Electrolux machines, or two beeps or flashes on compatible models, indicates a drainage problem. Keep a record of any additional subcode.
Installation, blockage or suds
The manufacturer’s documentation also lists E22, E23 and E24. Don’t automatically interpret them as different components that need replacing. Note whether water remains and whether the appliance tries to pump it out.
Check for a kinked hose, insertion depth and height as specified in the manual. If the hose connects to a trap, check whether the household drain also backs up. If there are excessive suds, record the detergent dosage and products used, as they can make draining more difficult.
Before opening the maintenance access panel
Confirm that a user-accessible filter is available for your PNC. Stop the appliance and disconnect it safely, let the water cool, and follow the gradual draining procedure. Remove the filter only after the controlled draining is complete; clean it and reinstall it so it seals properly.
See cleaning the pump filter for help with preparation. If there is no authorized access point or draining continues to fail, request assistance. Don’t try another wash with water still in the appliance or force the door open to retrieve laundry.
Pump noise doesn’t confirm that the drainage path is clear or that the flow rate is sufficient.
View all articles in Electrolux washer error codes and alerts
