EF0/EFO on Electrolux machines may be associated with a leak, excessive suds or an unbalanced load. The support documentation consulted identifies EF3 as leak detection.
Prioritize any water leak
The manufacturer's documentation does not attribute all of these codes solely to detergent. If you see water leaking, stop using the machine and shut off the water supply. Avoid handling the plug if there is moisture or water around it.
Visually check the dispenser drawer, filter connection, hoses and door seal. A trapped item may prevent the seal from sitting properly, but checking for one does not rule out other leaks. Do not tilt the washing machine to drain an internal tray.
If there is no visible leak
If there are lots of suds, check the amount of detergent and any added products, and follow the recovery time in the manual. Clean the dispenser drawer only through the user-accessible opening if there is a buildup. If there are no suds but the laundry is bunched up, wait for the door to unlock normally and redistribute the load within the programme's capacity.
Record the condition you found. If the warning returns or you cannot locate the leak, request a diagnosis and provide the PNC and complete error code. If the issue is limited to suds, see how to correct excessive suds.
Do not run another cycle to check whether EF3 clears while water is still appearing.
View all articles in Electrolux washer error codes and alerts
