E40/E41 on Electrolux indicates that the door or lid isn’t properly closed or recognized. Four beeps or flashes may signal this condition on compatible control panels.
Check the part that needs to close
The manufacturer’s documentation covers compatible front-load washers, top-load washers and washer-dryers. Use the manual for your PNC to identify the closure; don’t look for a front-loader’s latch in a top-loader’s design.
Stop the appliance and open it when permitted. Remove items from the seal and latch area; reduce the load if it’s pressing outward. Check for any visible obstruction, then close it without slamming.
When the control panel still indicates that the door is open
An apparently closed mechanical latch doesn’t guarantee that the door is recognized as closed. If your model has a mechanical child safety lock, check its specific operation before moving it: not all models have one, and it isn’t the same as the control lock.
Only retry the procedure specified in your manual after correcting the alignment. If the warning returns with nothing obstructing the door’s travel, request service. If the door won’t release, use the door and lid safety release procedure before attempting an emergency opening.
Note whether the fault occurs when starting or after the wash has begun; these are different observations for service.
View all articles in Electrolux washer error codes and alerts
