What spin speed to choose and how to spin separately

Choose a spin speed that the garment and programme can handle. A higher speed may remove more water, but tolerance for creasing and distortion depends on the garment’s construction; there is no spin-speed chart that applies to every fibre.

Understand the options before changing the spin speed

OptionWhen to use it
Spin onlyRemove water from a load that has already been washed or rinsed, if your model offers this function.
No spinAvoid the spin cycle; check whether the programme still drains the water at the end.
Rinse holdThe load may remain in water until you follow the completion steps set out in the manual.

Don’t confuse a selected rinse hold with a failure to drain. Before removing the clothes, complete the approved sequence and wait for the door to unlock normally.

Choose the intensity for the actual load

Check the care label and cycle restrictions. For knits, filled items or sensitive finishes, the overall construction matters, not just the fibre. If you notice excessive creasing, also check how much you have loaded and how long the clothes sit in the machine after the cycle ends.

To run a separate spin cycle, check the load distribution and select a permitted limit. The maximum figure on the control panel does not guarantee the machine will reach it: load distribution and cycle conditions may limit the speed. Don’t repeat attempts with an item that is not suitable, or add improvised weights.

If the clothes remain soaked despite the correct settings, or the drum does not spin, continue with spin troubleshooting.

View all articles in Washing machine programmes, settings and controls