The soil level indicates how intensive a wash the load needs. It does not measure the load’s weight or necessarily select more water; what actually changes depends on the cycle and the model.
Look at how dirty the load is, not its size
A small load with set-in stains may need more treatment than a larger load worn briefly. Assess visible dirt, areas that have been in contact with skin, how long it has been since the items were worn, and whether stains have been pre-treated. If items have very different needs, separating them can avoid putting delicate garments through an intensive cycle.
Check the manufacturer’s table to see what each level changes: it may affect the cycle duration or another part of the sequence. Don’t assume that Heavy means a higher temperature, a maximum fill level or that it is suitable for any fabric.
When the setting isn’t enough
The detergent needs to reach the dirt. An overloaded load, unsuitable detergent or a stain that needs specific treatment won’t be fixed just by increasing the level.
- For solids or a heavy initial soil load, check whether a pre-wash is appropriate.
- For a localised stain, prepare the area with a compatible treatment.
- If there isn’t enough movement, check the load size and distribution.
After washing, check the result before drying the affected garment. If changing the setting doesn’t fix the problem, identify the cause again; don’t automatically increase the temperature, detergent and time all at once.
Choose the setting based on the dirt you can see. Stay within the fabric’s limits, even if another item in the load needs more treatment.
View all articles in Washing machine programmes, settings and controls
