Collect accessible sand and mud before running another cycle. If particles also arrive with fresh water, check the water supply: cleaning the drum alone won't solve the problem.
Did it come in with the clothes or the water?
If it appears after a load with dirt on it, start by removing residue from that wash. If it returns with no dirty loads, or coincides with work on the water network, check the water from other taps and contact your water supplier or the person responsible for the installation. Don't use a cleaning test to confirm that water is safe to drink.
Remove particles without dragging them across the finish
- Make sure the appliance is empty, switched off and cool; isolate the power supply before working by hand.
- Collect visible deposits with a soft cloth, lifting them away in small amounts. Don't repeatedly rub dry sand across metal or glass.
- Clean reachable edges and folds without pushing material through holes or under the impeller.
- Check the maintenance instructions for the drain filter if it's accessible on your model. Deal with any trapped water first.
- Only after removing the particles, run an approved empty cleaning cycle and check the result.
Don't tilt the machine to release sediment or dismantle the pump, tub or valve. A large build-up that's out of reach may need professional servicing.
What to do if it happens again
If it seems to be coming from the inlet, check the water inlet screens as instructed in the manual. Don't remove them permanently to prevent blockages. If the source was a load, cleaning the drum can help finish removing surface residue, but it won't repair the machine.
A new scraping noise, failure to drain or residue that doesn't decrease are reasons to stop the test. Adding descaler or detergent won't remove a quantity of trapped sand by itself.
Identifying the source prevents you from repeating a cleaning that the next fill will undo.
View all articles in Clean the machine after accidental or heavy soiling
