Store a washing machine that’s not in use and get it running again

Before leaving the washing machine unused, empty it, complete any outstanding cleaning and allow accessible areas to dry. Turn off the water, disconnect the machine and treat automatic dispensers according to the model’s manual.

Preparing before an absence

Don’t leave a damp load or products that have been applied but only partly rinsed. Complete any necessary cleaning in time for the machine to dry, remove visible residue and check that any removed parts are returned to their correct positions. The storage area must meet the appliance’s environmental requirements.

Check automatic dispensing separately. For the product range described by Whirlpool for Load & Go, the manufacturer asks you to clean and empty the dispensers before a prolonged period of inactivity. Other systems may require a different purge; use the automatic dispensers and circuits or TwinDos instructions as applicable.

Follow the storage instructions to turn off the water supply and isolate the power. If a ventilation function is active, let it complete its operation as directed in the manual before disconnecting the machine. Leave the door or lid open enough to allow drying without creating a hazard or forcing the closure.

Checks when you return

  1. Look for moisture, fresh water marks, unusual smells or signs of pests around the appliance.
  2. Inspect visible cables and hoses. Check that the connections haven’t been disturbed while you were away.
  3. Make sure filters, plugs and dispensers are still fitted and that there are no textiles or objects inside.
  4. If there’s no damage and the installation is correct, restore the water and power supply as directed in the manual. Run the return-to-use check or cleaning cycle specified, and monitor filling and draining.

If the appliance was wet in a flood, has rodents inside or has electrical damage, arrange an assessment before connecting it. An empty cycle does not prove it’s safe to operate.

Storage and transport are different tasks

Leaving the machine in place doesn’t automatically mean you need to prepare it for a move. If you’re going to move it, see transporting the washing machine. If the area may freeze, follow the preparation for freezing conditions before storage.

You should be able to stop the first check after your absence if you notice drips, new noises or a drainage fault; don’t schedule it to run unattended.

View all articles in Preventive maintenance: tasks and frequency based on use