Storing a washing machine that is not in use and starting it again

Before leaving the washing machine unused, empty it, complete any pending cleaning and allow accessible areas to dry. Follow the model's manual when turning off the water supply, disconnecting the machine and handling automatic dispensers.

Preparing before an absence

Do not leave a damp load or products that have been applied but not fully rinsed out. Complete any necessary cleaning in good time to allow the machine to dry, remove visible residue and check that any parts you have removed are put back in place. The storage area must meet the appliance's environmental requirements.

Check automatic dispensing separately. For the product range described by Whirlpool for Load & Go, the manufacturer asks you to clean and empty the dispensers before an extended period of inactivity. Other systems may need to be purged differently; follow the instructions for automatic dispensers and circuits or TwinDos as applicable.

Follow the storage instructions to turn off the water supply and isolate the power. If an active ventilation function is running, let it complete as directed in the manual before disconnecting the machine. Keep the door or lid slightly open to allow drying, without creating a hazard or forcing the closure.

Checks when you return

  1. Look for dampness, fresh water marks, unusual odours or signs of pests around the appliance.
  2. Inspect the visible cable and hoses. Check that the connections have not shifted while you were away.
  3. Check that filters, caps and dispensers are still fitted, and that there are no textiles or objects inside.
  4. If there is no damage and the installation is correct, restore the water and power supply as directed in the manual. Run the return check or cleaning cycle specified there, and monitor filling and draining.

If the appliance was exposed to floodwater, has signs of rodents inside or has electrical damage, arrange for it to be assessed before connecting it. An empty cycle does not prove that it is safe to operate.

Storage and transport are different tasks

Leaving the machine where it is does not automatically require preparing it for a move. If you plan to move it, see transporting a washing machine. If the location may freeze, follow the preparation for freezing conditions before storage.

You should be able to stop the first check after your absence if you notice drips, new noises or a drainage fault; do not schedule it to run unattended.

View all articles in Preventive maintenance: tasks and frequency based on usage