Storing a washing machine that won’t be used and putting it back into service

Before leaving the washing machine unused, empty it, complete any outstanding cleaning, and let accessible areas dry. Shut off the water, disconnect the power, and handle automatic dispensers according to the model’s manual.

Preparing before an absence

Don’t leave a damp load or products that have only been partially rinsed. Complete any necessary cleaning in time for the machine to dry, remove visible residue, and check that any removed parts are put back in place. The storage area must meet the appliance’s environmental requirements.

Check automatic dispensing separately. For the product family described by Whirlpool for Load & Go, the manufacturer recommends cleaning and emptying the dispensers before an extended period of inactivity. Other systems may require a different purge; use the instructions for automatic dispensers and circuits or TwinDos as applicable.

Follow the storage instructions to shut off the water supply and disconnect the power. If an active ventilation function is running, let it finish according to the manual before disconnecting the appliance. Leave the door or lid in a position that allows it to dry without creating a hazard or forcing the closure.

Inspection when you return

  1. Look for moisture, fresh water marks, unusual odours, or signs of pests around the appliance.
  2. Inspect the visible cord and hoses. Check that the connections have not been moved while you were away.
  3. Make sure the filters, caps, and dispensers are still installed and that there are no textiles or objects inside.
  4. If there is no damage and the installation is correct, restore the water and power according to the manual. Run the return check or cleaning cycle it recommends, and monitor filling and draining.

If the appliance was wet from a flood, has rodents inside, or has electrical damage, have it assessed before connecting it. An empty cycle does not prove that it is safe to operate.

Storage and transport are different tasks

Leaving it in place does not automatically mean you need to prepare it for a move. If you’re going to move it, see transporting the washing machine. If the area may freeze, follow the preparation for freezing temperatures before storage.

You should be able to stop the first check after your absence if you notice drips, new noises, or a draining failure; don’t schedule it to run unattended.

View all articles in Preventive maintenance: tasks and frequency based on use