Residue that appears during a cleaning cycle may be loosened deposits, but its black colour does not prove that it is mould. Collect what you can see and check whether the amount decreases or whether it seems to be coming from a damaged part.
Observe the residue without assuming its cause from its colour
With the machine empty, switched off and cool, check what remains in the drum and around its edge. A soft sheet, a clump of soap and a flexible fragment are not the same kind of observation. You do not need to dissolve them to describe them; note their appearance, quantity and when they appeared.
If you find fragments that look like rubber, metal or plastic, check only the parts that are visible. A new noise, rubbing or a leak changes what needs attention first: avoid running further cycles until you have established whether something is deteriorating.
What to do after a cleaning cycle releases deposits
- Remove accessible residue with a soft cloth or as directed in the manual, without pushing it through the perforations.
- Check the surfaces and approved filters or collectors where residue may have built up.
- Complete the rinse specified for the treatment. If the manufacturer recommends repeating the cleaning, follow that specific instruction.
- Check the empty machine again and compare the amount of residue. Do not put clothes in to collect any residue that remains.
The tub-cleaning programme routine determines whether to repeat the cleaning. If the residue does not decrease, do not keep switching to stronger cleaners: ask for an inspection and share your observations.
Distinguish cleaning from prevention
A build-up of soap means you should check the detergent dosage once the machine is clean. For widespread damp film, see mould and biofilm. If the deposit looks mineral, use the limescale and water assessment before choosing an acid.
Cleaning the drum and tub addresses residue inside the machine. If you see stains only on clothes and no residue inside the machine, follow the checks for stains on clothes: do not assume that every mark comes from dirt in the tub.
Keep a description or photograph of the residue to share with support if it continues. You do not need to dismantle the drum to document what is happening.
View all articles in Bad odour from the washing machine: identify the source and get rid of it
