When to disinfect a washing machine and how to check the method

Disinfecting a washing machine requires a specific need and a method approved for the appliance. A common odour or a hot cycle alone does not show that disinfection is needed or that the desired level of effectiveness will be achieved.

Start by identifying what happened

Describe the residue or contamination, which surfaces it reached, and whether the appliance remains safe to use. Do not connect a machine affected by flooding to disinfect it: it needs a technical assessment first.

The CDC distinguish between cleaning and disinfection and recommend removing dirt before disinfecting surfaces. Their household guidance is not a validated formula for every internal washing machine circuit.

Check these requirements against both sets of instructions

DocumentWhat it must confirm
Appliance manualCompatible surfaces, approved product, application method and cycle
Disinfectant labelIntended use, stated purpose, required concentration or dose, and contact time
Treatment instructionsPreparation, personal protection and final rinsing or removal

If the label only describes use on a benchtop, do not assume a cycle will dilute and apply the product correctly inside the drum. Nor should you calculate a disinfection time from the temperature shown on the selector: it does not indicate the actual exposure of each surface.

Application and outcome

Remove visible dirt using the approved access points, then complete the validated procedure without combining substances. If the approved product is chlorine-based, check the conditions for using bleach and cleaner safety.

When finished, verify that the process is complete and that no product residue remains to be rinsed off. A surface with no odour or stains is not a microbiological measurement. If the situation requires documented health-related effectiveness, follow the applicable protocol and consult a suitably qualified professional.

For recurring damp stains without an identified contamination event, the mould and deposits pathway can help you decide how to clean and investigate the cause.

Do not turn general advice for surfaces into a treatment for the entire washing machine. The method must suit the specific use and appliance.

View all articles in Washing machine smells bad: identify the source and get rid of it