Residue that appears during cleaning may be loosened deposits, but a black colour does not prove that it is mould. Collect what you can see and check whether the material decreases or seems to come from a damaged part.
Observe the residue without assuming its cause from its colour
With the washer empty, stopped and cool, check what remains in the drum and along the rim. A soft sheet, a clump of soap and an elastic fragment are not equivalent observations. You do not need to dissolve them to describe them; note their appearance, quantity and when they appeared.
If there are fragments that look like rubber, metal or plastic, check only the visible parts. A new noise, rubbing or a leak changes the priority: avoid running more cycles until you can determine whether there is deterioration.
What to do after cleaning loosens deposits
- Remove accessible residue with a soft cloth or the method in the manual, without pushing it through the holes.
- Check the surfaces and permitted filters where residue may have accumulated.
- Complete the rinse specified for the treatment. If the manufacturer recommends repeating the cleaning, follow that specific instruction.
- Check the empty washer again and compare the amount. Do not put clothes in to collect any remaining residue.
The tub-cleaning programme determines whether to repeat it. If the residue does not decrease, do not switch to increasingly stronger cleaners each time: request an inspection and share your observations.
Distinguish cleaning from prevention
A build-up of soap means you should check the detergent dosage once the washer is clean. For widespread damp film, see mould and biofilm. If the deposit looks mineral, use the limescale and water assessment before choosing an acid.
The drum and tub cleaning addresses residue inside the washer. If you only see stains on clothes and no residue inside, follow the clothing stain check: do not assume every mark comes from dirt in the tub.
Save a description or photo of the residue for support if it continues. You do not need to take the drum apart to document what is happening.
View all articles in Washing machine with a bad odour: identify the source and eliminate it
