Stuck internal drum flaps in a top-loading washing machine

On a top-loading washing machine with a horizontal drum, open or stuck internal flaps can prevent the drum from turning. Stop using the machine and do not try to reposition them by forcing the drum to turn.

Check that this is the right design

This issue affects horizontal drums with opening flaps inside an outer lid. A top-loader with a vertical agitator does not use the same assembly. If only the outer lid will not open, see lid lock.

Signs that mean you should stop the machine

A bang followed by the drum becoming stuck, an opening that is no longer aligned, or suspected flaps opening while the drum was turning all require an inspection. Do not try another programme to make the drum return to position.

Safely isolate the power supply. Do not insert screwdrivers, rods or wires through the perforations: you could damage the flaps, latches, drum or heating element and make the jam worse.

What the service technician should assess

They should locate the drum, check the flaps and their locking mechanism, and rule out damage to nearby surfaces. How it can be freed depends on access to that platform and may require dismantling.

Tell them whether the flaps were closed before the wash, when you heard the bang and whether you can feel resistance. You do not need to recreate the mechanical jam to provide this information.

Freeing the drum is not enough if the internal latch has been damaged: the flaps must also be checked to make sure they lock securely again.

View all articles in Washing machine door, lid and safety lock problems