Stuck internal flaps in a top-loading washing machine

In a top-loading washing machine with a horizontal drum, open or jammed internal flaps can prevent the drum from turning. Stop using the machine and do not try to reposition them by turning the drum forcefully.

Confirm that this is the right design

This issue affects horizontal drums with opening flaps inside an outer lid. A top-loader with a vertical agitator does not use the same assembly. If only the outer lid will not open, check the lid lock.

Signs that mean you should stop the machine

A bang followed by the drum becoming immobile, an opening that is no longer aligned, or a suspicion that the flaps opened while the drum was turning all require inspection. Do not try another programme to get the drum back into position.

Safely disconnect the power supply. Do not insert screwdrivers, rods or wires through the perforations: you could damage the flaps, latches, tub or heater and make the jam worse.

What the service technician should assess

They should locate the drum’s position, check the flaps and their retaining mechanism, and rule out damage to nearby surfaces. The recovery method depends on access to that platform and may require dismantling.

Tell them whether the flaps were closed before the wash, when you heard the bang, and whether you can feel resistance. You do not need to recreate the mechanical jam to provide this information.

Releasing the drum is not enough if the inner latch is damaged: the flaps must also be checked to ensure they retain properly again.

View all articles in Door, lid and safety lock problems