F5 E2 on the documented Maytag front-loader indicates that the door lock isn't engaging. A trapped garment or a load pressing against the latch are the first things to check.
Check the fit with the machine stopped
The manufacturer's documentation identifies the issue as being with the front door lock. Pause or cancel using your control panel, then wait until the door can be opened. Move any sleeves, drawstrings or clothing edges away from the door seal. Remove some of the load if it's pressing against the door, then close it again without slamming it.
The latch may look engaged but still not be recognised. Note whether you hear an attempt to lock, whether the message appears immediately and whether the cycle started to fill with water. Don't put objects into the latch opening to simulate the door closing.
Retry and escalation
Use only the cancellation and restart sequence in the manual. If the door won't open, there's water inside or the lock remains stuck, follow the door, lid and safety guide before trying to access the laundry.
If F5 E2 appears again with nothing obstructing the lock, contact a service technician. Lid alerts for HE top-loaders are listed separately in the Maytag index; instructions for a front-loader won't resolve them.
If you have to force the door shut, there's still a problem even if the message disappears temporarily.
