F5 E2 on the documented Maytag front-load washer indicates that the door lock isn’t engaging fully. A trapped item of clothing or a load pressing against the latch are the first things to check.
Check the fit with the machine stopped
The manufacturer’s documentation points to the front door latch. Pause or cancel the cycle using your control panel, then wait until the door can be opened. Move any sleeves, drawstrings or clothing edges away from the door seal. Remove some of the load if it’s pressing against the door, then close it again without slamming.
The latch may seem to engage and still not be detected. Make a note of whether you hear it trying to lock, whether the warning appears immediately and whether the cycle started filling with water. Don’t insert objects into the latch opening to simulate the door closing.
Retry and next steps
Use only the cancellation and start sequence in the manual. If the door won’t open, there’s water inside or the latch remains stuck, follow the door, lid and safety guide before trying to access the laundry.
If F5 E2 repeats when the latch is unobstructed, contact service. Lid warnings on an HE top-load washer are covered separately in the Maytag index; they aren’t resolved by applying instructions for a front-load washer.
A door that takes force to close still has a problem, even if the message disappears temporarily.
