ASKO E2 and E22 errors: the door will not lock

On the ASKO WM76S, E2 and E22/E22.1 are related to the door not completing the locking cycle. The manual distinguishes between an open door, a door that appears closed and a mechanism that needs to reset.

E2 with the door open or apparently closed

The manufacturer's documentation explains that a door that is not fully closed may move back during an attempt to lock it. With the machine stopped, move any clothing away from the catch and check that the door closes normally without forcing it.

For certain E2 cases on the WM76S, the mechanism needs approximately ten seconds to return to its position, and the control panel may not respond while you wait. If the door appears closed, the manual advises switching the machine off using the control, switching it back on and waiting for the mechanism to reset. This timing is not a rule for all ASKO machines.

E22 or E22.1

These alerts indicate that the door is closed but cannot be locked. Once you have checked that nothing is obstructing the catch, follow the user reset procedure in the manual. If the error returns, request a service visit.

If the mechanism prevents the door from closing or you need to use an emergency procedure, check its exact conditions; do not insert tools based on a generic instruction. If you need to release a door that is already locked, use the door and safety guide and the relevant unlocking alert.

Note whether the door moves back, stays closed or will not close; these are different situations, even if they all involve E2.

View all articles in ASKO washing machine error codes and warnings