On the ASKO WM76S, E2 and E22/E22.1 are related to the door not completing the locking process. The manual distinguishes between an open door, a door that appears closed, and a mechanism that needs to reset.
E2 with the door open or apparently closed
The manufacturer’s documentation explains that a door that isn’t fully closed can move back during an attempt to lock it. With the machine stopped, move any clothing away from the latch and check that the door closes normally without forcing it.
For certain E2 cases on the WM76S, the mechanism needs about ten seconds to return to its position, and the control panel may not respond during this wait. If the door appears closed, the manual advises turning the machine off using the control, turning it back on, and waiting for the reset. This timing is not a rule for all ASKO models.
E22 or E22.1
These alerts describe a closed door that can’t be locked. After checking that the latch is clear, follow the manual’s user reset procedure. If the error returns, request service.
If the mechanism prevents the door from closing or you need to perform an emergency procedure, check the exact conditions; don’t insert tools based on a generic instruction. If you’re trying to release a door that’s already locked, use the door and safety guide and the relevant unlocking notice.
Note whether the door moves back, stays closed, or won’t close; these are different situations even if they share the E2 error.
View all articles in Error codes and alerts for ASKO washing machines
