To clean a top-loading washing machine, first check whether it has a vertical tub with an agitator or impeller, or a horizontal drum with flaps. The top opening does not determine which parts can be removed or which cycle is suitable.
If it has an agitator or impeller plate
With the machine empty and disconnected from the power supply for manual cleaning, remove debris from the lid, the loading rim and visible surfaces. Clean the agitator body or impeller plate without releasing any fasteners. A dispenser lid may be removable while the lower assembly remains fixed.
The agitator and impeller guide helps distinguish a part that users can remove from one that requires technical disassembly. If the model has a lint catcher, clean it separately and put it back before using the machine.
If it has a horizontal drum with flaps
Wait for the machine to unlock and for the flaps to reach the position specified by the appliance. Check the flaps and reachable edges with a soft cloth. Do not force hinges, springs or latches, or turn the drum when the flaps are not properly closed. If they do not close as described in the manual, stop using the machine.
Find the procedure for dispensers and filters for this type of machine. Do not assume that a guide for a vertical tub describes how to access them.
Finish with the approved internal cleaning procedure
- Check that no objects remain and that the dispensers, lint catchers and flaps are fitted.
- Select the maintenance cycle for the model and use only the recommended product.
- When it is finished, wait for the machine to unlock and check the wash area: remove any accessible debris and run the subsequent rinse if indicated.
- Dry the rim and allow the lid to ventilate safely.
Do not add water manually to raise the temperature or water level of an automatic appliance. If it does not have a heater, adapt the cleaning to its programmes and water supply rather than using a temperature specified for another machine.
Top access makes some areas easier to see, but it does not make the agitator, impeller or pump a part to remove as part of routine cleaning.
View all articles in How to clean a washing machine based on its type
