Cleaning a top-load washer

To clean a top-load washer, first check whether it has a vertical tub with an agitator or impeller, or a horizontal drum with flaps. The top opening does not determine which parts can be removed or which cycle the washer supports.

If it has an agitator or impeller plate

With the washer empty and unplugged for any hands-on work, remove debris from the lid, loading rim and visible surfaces. Clean the agitator body or impeller plate without loosening any fasteners. A dispenser cover may be removable even when the lower assembly is fixed in place.

The agitator and impeller guide helps distinguish a part that users can remove from one that requires technical disassembly. If the model has a lint filter, clean it separately and put it back in place before using the washer.

If it has a horizontal drum with flaps

Wait for the washer to unlock and for the drum to reach the opening position specified by the machine. Check the flaps and accessible edges with a soft cloth. Do not force hinges, springs or latches, or turn the drum when the flaps are not properly closed. If they do not close as directed in the manual, stop using the washer.

Find the instructions for dispensers and filters for that design. Do not assume that a guide for a vertical tub describes how to access them.

Finish with the approved interior cleaning procedure

  1. Check that no objects remain and that the dispensers, filters and flaps are in place.
  2. Select the maintenance cycle for the model and use only the specified product.
  3. When the cycle is finished, wait for the washer to unlock and check the wash area: remove any accessible debris and run the follow-up rinse if indicated.
  4. Dry the rim and allow the lid to air out safely.

Do not add water manually to raise the temperature or water level in an automatic washer. If it has no heater, adapt the cleaning to its programmes and water supply rather than using a temperature intended for another machine.

Top access makes some areas easier to see, but it does not make the agitator, impeller or pump routine removable parts.

View all articles in How to clean a washing machine by type