Cleaning and maintaining a washer-dryer

A washer-dryer combines the maintenance required for washing with the maintenance its design requires for drying. Identify the filters and access points in its manual: a pump filter and an air filter do different jobs.

Make an inventory of the two pathways

For washing, look for instructions on the dispenser, door seal, drum and drain filter if there is an access point. For drying, check whether there are lint filters, a fibre-clearing routine or areas of the heat exchanger that the user can reach.

In some washer-dryers, the water-condensation circuit does not have a condenser that the owner can remove. Heat-pump models may offer different access points. As a specific example, GE documents a multi-stage filtration assembly in the UltraFast Combo; this arrangement does not describe all washer-dryers.

Coordinate tasks without mixing up procedures

  1. Check the maintenance reminders and the section each one relates to.
  2. Wait for the drying cycle to finish and for the specified areas to cool before doing any manual work. Isolate the power supply if required for access.
  3. Clean the filters and lint along the air pathway using the method suited to their material; refit all the parts.
  4. Run the washing cleaning cycle as intended, separately from any programme for garments.
  5. Check that the filters are properly seated and that there is no visible residue before the next load.

If drying performance continues to worsen

A clean filter alone does not confirm that the drying system is working properly. Note whether the change occurs with every load, whether a warning appears and which task was carried out. Cleaning can be a step in checking the issue; it does not justify opening sealed ducts, the casing or the refrigerant circuit.

If the problem continues after the authorised maintenance, follow the poor drying troubleshooting steps or request a service visit. Do not adapt the disassembly procedure for a standalone dryer to a washer-dryer.

Keep two points in your routine: washing-system cleaning and drying-system maintenance. Each may have different warnings and conditions.

View all articles in How to clean a washing machine based on its type