Cleaning a semi-automatic twin-tub washing machine

Clean the two tubs separately: in the wash tub, check for residue, the pulsator and any fitted lint filters; in the spin tub, check the accessible basket and rim. Draining and any rinsing must follow the manual for that semi-automatic machine.

Before cleaning by hand

Finish the cycle and wait until all parts have come to a complete stop. Drain the machine using the designated system and disconnect the power supply before accessing the areas to be cleaned. Do not put your hand into a basket that is still spinning or interfere with the lid lock.

Check whether the machine drains by gravity or by pump. This determines the authorised way to drain it; do not tilt the appliance or change the hoses to improvise. If the water does not drain as it should, resolve the issue before filling the machine again.

Inspect each tub separately

  • Wash tub: remove visible solid debris and wipe the walls, rim and pulsator surface with a soft cloth. Do not loosen its screw or insert tools beneath the plate.
  • Spin tub: inspect the empty basket, opening and inner lid, if present. Remove only parts that the manual says can be taken out; do not push cloths between the basket and its outer casing.
  • Filters and overflow: locate the lint filter and any parts designated for maintenance. The overflow may have its own assembly; do not remove a cover just because it resembles one on another model.

Keep the controls, cable, motor and casing dry. Cleaning a tub does not mean you can rinse the entire appliance with a hose.

Rinsing and drying

Use the filling, agitation or rinsing procedure specified in the manual for maintenance. Not all twin-tub machines have a self-cleaning function or can take hot water. Use a compatible product only when specified.

After draining, check both tubs: debris may have moved from one to the other when transferring the clothes. Refit the filters and retaining parts, dry the reachable surfaces and leave the lids in a safe position to allow ventilation.

If dirt remains under a pulsator that users cannot remove, the next step is to check the technical maintenance guidance, not try to prise it off.

View all articles in How to clean a washing machine based on its type