Washing machine door won’t open at the end of the cycle

If the door is still locked, check that the cycle has finished and that there is no water left or thermal condition preventing it from opening. Do not pull the handle to override a safety lock.

Check the status before trying to open it

  1. Check the display: cycle complete does not always mean paused or interrupted. Note down any message.
  2. Check whether any water is visible. If draining fails, follow the safe drainage instructions before attempting to open the door.
  3. Check the model’s waiting period and cooling requirements. Do not use the waiting time for another brand.
  4. Check whether the manual distinguishes between a control lock and a door lock. Cancelling or restarting does not guarantee that the door will open immediately.

If an emergency release is provided

Use it only when the power supply is isolated, the machine has stopped moving, and the water and temperature conditions specified by the manufacturer are met. Do not mistake a visible cable or tab for an emergency control.

If the manual does not provide a user-accessible method, the handle is broken, or you cannot confirm that it is safe to open the door, seek assistance to retrieve the load.

Broken handle or lock that will not release

A handle that offers no resistance may not be engaging the mechanism, while a lock may still be holding the door shut. These are different possibilities that require checking the door mechanism and the safety lock. Do not use levers against the glass or ropes around the seal.

Once you have retrieved the clothes, do not use a damaged lock again until it has been repaired and its operation checked.

View all articles in Door, lid and safety lock problems