Tachogenerator and Hall sensor: diagnosing motor speed

Irregular acceleration may make it necessary to check rotation information, but it does not by itself identify a faulty sensor. First, find out how the drive for that model obtains this information.

Three architectures that are not equivalent

Some motors use a tachogenerator; others incorporate Hall sensors, while certain controls estimate rotation without a separate sensor that can be replaced as a part. The parts diagram and circuit diagram determine which one is present and whether it is supplied separately from the motor.

This component provides information about motor movement. It should not be confused with a vibration sensor or with the appliance deciding to limit the spin cycle due to other conditions.

Trace the signal to the control

  1. Identify the specified sensor, mounting and connections.
  2. Check the wiring and connectors using the procedure for working without power.
  3. Check the signal and its operating conditions against the technical documentation.
  4. Assess how it is received by the electronic module and whether the drive produces the requested movement.

Jerking, loss of acceleration or a related fault code can guide this check, but may also occur with faults in the motor and its control. The meaning of the code depends on the manufacturer and model.

Limits of testing

A measurement requires conditions, terminals and values specific to that circuit. Active signals and any tests performed with power on should be handled by a competent person with the appropriate equipment. Do not interchange terminals or test resistance using values published for another product family.

Before replacing the sensor, the diagnosis should distinguish a genuine absence of signal from a break in the wiring and a reading fault in the control.

View all articles in Diagnosing and repairing washing machine components