Recirculation pump: faults with spray jets and wash circulation

The absence of a spray jet only indicates a possible recirculation fault if the model has that circuit and it should be active at that stage. Visible water may also come directly from the inlet.

Identify where the water should come from

Recirculation returns water from the drum to the wash circuit. It is different from taking in fresh water and draining water away. The explanation of the recirculation circuit helps you locate these functions.

Not all washing machines use a second pump or maintain a continuous spray jet. Check the manual to see which programmes and conditions use it before interpreting its absence.

Follow the documented route

  1. Confirm the programme, stage and conditions required to activate the function.
  2. Check only the accessible cleaning points approved for this purpose.
  3. Investigate blockages or damage to the ducts in the circuit.
  4. Check the pump, connections and control sequence using the technical procedure.

The operation of the drain pump does not prove that the circulation pump is working properly. Nor does a noise confirm that the water is following the expected route.

When replacement is appropriate

Internal repairs require safe isolation, water containment, and exact identification of the pump and connections. Seals, clamps and pipe routes must be reinstated, and watertightness and circulation tested with the appliance assembled.

Compatibility is not determined by appearance: a drain pump and a circulation pump are not interchangeable without documented equivalence.

Say which programme was running and which outlet you expected to see water from; this observation helps establish first whether a recirculation command should have been active.

View all articles in Washing machine component diagnosis and repair