On Maytag front-load washers, F9 E1 means draining is taking too long. On HE top-load washers, drn indicates an improper drain; installation and filter access depend on the model.
Water left in the washer and household drain
According to the manufacturer’s documentation, a restriction in the drain path or excess suds can slow draining. Check whether the hose is kinked, whether the issue started after connecting it under a sink, and whether the household drain is also clogged. Don’t assume the pump’s condition based on its noise alone.
Clean only the filter intended for user access
Check the manual before opening a cover: some designs don’t allow access to the pump from the outside. If there’s a user-accessible filter, safely stop and unplug the washer, let the water cool, and prepare a container. Drain it slowly through the specified route before removing the filter.
Reinstall it with no debris on the seal, and check that it’s closed securely before using the washer again. The drain pump filter cleaning guide explains how to prepare. Using a drain height copied from another platform may make the problem worse; use the height specified for your Maytag.
If water is still pooling after these accessible checks, stop starting cycles and request a diagnosis. For drn, be sure to mention that it’s an HE top-load washer.
If detergent has built up on the laundry, don’t add another full dose just because you cancelled the cycle.
