On Maytag front-load washers, F9 E1 means draining is taking too long. On HE top-load washers, drn indicates a drainage problem; installation and filter access depend on the model.
Water remaining in the washer and household drainage
According to the manufacturer's documentation, a restricted drain path or suds can slow water from draining. Check whether the hose is kinked, whether the issue began after connecting it under a sink, and whether the household drain is also blocked. Don't infer the condition of the pump from its noise alone.
Clean only the filter intended for user access
Check the manual before opening a cover: some designs don't allow access to the pump from the outside. If there is a user-accessible filter, stop the washer and disconnect it safely, let the water cool and have a container ready. Drain the water slowly through the specified outlet before removing the filter.
Refit it with no debris on the seal and check that it is closed properly before using the washer again. The drain filter cleaning guide explains how to prepare. Using an outlet height copied from another platform may make the problem worse; use the height specified for your Maytag.
If water is still being retained after these accessible checks, stop starting cycles and arrange a diagnosis. For drn, be sure to mention that it is an HE top-load washer.
If detergent has built up on the clothes, don't add another full dose just because you've cancelled the cycle.
