EH0/EHO on Electrolux appliances relates to the electrical supply. The error family distinguishes EH1 for out-of-range frequency, EH2 for high voltage and EH3 for low voltage.
Separate a supply issue from an appliance fault
The manufacturer's documentation confirms these subcodes, but the control panel is no substitute for a professional electrical check. Note whether other appliances also experienced interruptions, or whether the fault started after the connection was changed.
Visually check that the appliance is connected directly, without an extension lead or makeshift adaptors. Do not open the socket or test another appliance if there is heat, an unusual smell, damage or moisture. If the protective devices trip, stop trying to restart it and arrange an inspection.
Reset only if there are no signs of damage
Support recommends unplugging the appliance for 30 to 60 seconds and selecting a programme again when the connection is dry, accessible and safe. Check the manual for the PNC; if the error returns, do not keep unplugging the appliance repeatedly.
A problem affecting the electrical installation should be dealt with by an electrician. If the supply has been checked and only the washing machine is faulty, arrange appliance servicing. The guide to washing machine sockets and protective devices explains what the installation should be checked for, without assuming a universal voltage.
Include the error suffix: frequency and voltage do not describe the same condition.
View all articles in Electrolux washing machine error codes and warnings
