Protecting your washing machine during frost and winter storage

If the washing machine may be exposed to freezing temperatures, check its environmental limits and storage procedure. Emptying the visible drum does not guarantee that all the water has been removed from the system.

Check the conditions at the location

A seasonal home, garage and motorhome can all have different temperatures from an occupied part of the home. Check where the machine, its hoses and connections will be, and whether the space falls within the permitted environmental range.

The most straightforward option is a location that meets those conditions. If this cannot be guaranteed, the manual should state whether a winterising procedure is available. Whirlpool documents a procedure for certain front-loading models because water may remain in the hoses; this does not mean its products or steps can be used for another washing machine.

What the model-specific procedure should cover

  • How to turn off the water supply and drain the connections without spilling water onto electrical parts.
  • Which drains or filters the owner can open, and how to collect any retained water.
  • Whether a winterising product is permitted and, if so, which one, where to use it and what preparation is needed afterwards.
  • Which parts must be put back in place and how to protect the machine while it is out of use.

Do not add automotive antifreeze or substitute a different formulation for an authorised one. Do not improvise with direct heat, boiling water or a wash cycle to thaw the system. If you cannot find the instructions, ask the manufacturer for the procedure using the model number.

Before using it again

Check that the temperature of the entire machine is within its limits and that there is no visible ice or damage. Follow the manual’s recommissioning instructions, including removing any preservative if its use was authorised. If a leak occurs when you turn the water back on, safely shut off the supply and stop the check.

To choose a protected location, see location and environmental conditions. If the machine also needs to be transported, check separately what transport protection is required.

Prepare the machine for storage before the frost sets in. If it has already frozen, ask a service technician how to inspect it before trying it out.

View all articles in Preventive maintenance: tasks and frequency based on use