Cleaning a twin-tub washing machine

Clean the two tubs separately: in the wash tub, check for residue, the pulsator and any fitted filters; in the spin tub, check the accessible basket and rim. Draining and any rinsing must follow the manual for that twin-tub machine.

Before cleaning by hand

Finish the cycle and wait until all parts have come to a complete stop. Drain the machine using the designated system and disconnect the power supply before accessing the areas to be cleaned. Never put your hand into a basket that is still spinning or tamper with the lid lock.

Check whether drainage is by gravity or pump. This determines the approved way to drain the machine; do not tilt the appliance or alter any hoses to improvise. If the water does not drain as it should, deal with the problem before filling the machine again.

Inspect each tub separately

  • Wash tub: remove any visible solid debris and wipe the walls, rim and surface of the pulsator with a soft cloth. Do not loosen its screw or insert tools beneath the plate.
  • Spin tub: inspect the empty basket, opening and inner lid, if fitted. Remove only parts that the manual says can be removed; do not push cloths between the basket and its casing.
  • Filters and overflow outlet: locate the lint filter and any parts specified for maintenance. The overflow outlet may have its own assembly; do not detach a cover just because it looks like one on another model.

Keep water away from the controls, cable, motor and casing. Cleaning one tub does not mean you can rinse the whole appliance with a hose.

Rinsing and drying

Use the filling, agitation or rinsing procedure described in the manual for maintenance. Not all twin-tub machines have a self-cleaning function or can be used with hot water. Use a compatible product only if specified.

After draining, check both tubs: debris may have moved from one to the other when transferring the laundry. Refit the filters and retaining parts, dry the reachable surfaces and leave the lids in a safe, ventilated position.

If dirt remains beneath a pulsator that users are not meant to remove, the next step is to check the servicing instructions, not to try forcing it off.

View all articles in How to clean your washing machine by type