Cleaning and maintaining a washer-dryer

A washer-dryer combines the maintenance required for washing with that required by its drying design. Use the manual to identify the filters and access points: a pump filter and an air filter do different jobs.

Map out the two pathways

For washing, look for instructions on the dispenser, seal, drum and drain filter if there is an access point. For drying, check whether there are lint filters, a fibre-flushing routine or areas of the heat exchanger that the user can reach.

In some washer-dryers, the water-condensation circuit has no condenser that the owner can remove. Heat-pump models may provide different access points. As a specific example, GE documents a multi-stage filtration assembly in its UltraFast Combo; that arrangement does not describe all washer-dryers.

Coordinate tasks without mixing up procedures

  1. Check the maintenance reminders and which part of the machine each one relates to.
  2. Wait for the drying cycle to finish and the specified areas to cool before carrying out any manual work. Isolate the power supply if required for access.
  3. Clean the filters and lint from the air path using the method appropriate for their material; refit all the parts.
  4. Run the washing-machine cleaning cycle as intended, separately from any programme for garments.
  5. Check the filter housings and make sure there is no visible debris before the next load.

If drying performance continues to decline

A clean filter does not, by itself, confirm that the drying system is working properly. Note whether the change occurs with every load, whether a warning appears and which task was carried out. Cleaning can be a troubleshooting step; it is not a reason to open sealed ducts, the casing or the refrigerant circuit.

If the problem continues after the authorised maintenance, follow the poor-drying troubleshooting steps or request a service visit. Do not adapt the disassembly procedure for a freestanding tumble dryer to a washer-dryer.

Keep two references in your routine: washing-system cleaning and drying-system maintenance. Each may have different warnings and conditions.

View all articles in How to clean your washing machine by type