The washer-dryer gets too hot during drying

Heat after drying may be expected; an unusual increase accompanied by an odour, smoke or safety shut-offs means you should stop using the appliance. Don’t check the temperature by touching areas that may be hot enough to burn you.

Normal cooling and signs of a fault

If the cycle runs without any issues, let it complete its cooling phase and follow the unloading instructions. Avoid interrupting it out of habit and leaving hot laundry piled up.

The LG F4X7*FPY* safety manual warns that heat can dissipate if drying is interrupted. If there’s smoke or you suspect a fire, don’t put yourself at risk to retrieve the load: follow the instructions for burning or smoke and contact emergency services.

What can affect the temperature

Restricted airflow due to lint, a fan that isn’t working properly, or incorrect temperature regulation can affect how the appliance operates. These are possibilities to check depending on the system, not diagnoses that can be made based on the heat of the cabinet.

With the appliance stopped, cool and disconnected from power, check only the filters and accessible areas specified by the manufacturer. Don’t open internal ducts or insert objects towards the fan.

If there were shut-offs or it heats up abnormally again

Have the drying circuit inspected. Don’t bypass thermostats or reset limiters without correcting the cause. If the problem affects the water during washing, see water overheating.

The appliance cooling down doesn’t confirm that airflow or temperature regulation are working properly again; don’t run another drying cycle until the fault has been identified.

View all articles in Washer-dryer not drying properly: system-based diagnosis