The washing machine won’t turn on and shows no lights

A washing machine that is completely switched off may have no power supply or may have an internal power or control fault. A dark display does not, on its own, prove that the control board is faulty.

First, rule out any dangerous situation

If you see water near electrical connections, burn marks, a damaged cable or smell something electrical, do not plug the appliance in again. Isolate the supply from a safe point and arrange for it to be checked.

External checks

Check the on/off switch and whether there is an accessible power switch provided as part of the installation. Check whether there was a known power cut and which other points lost power, without dismantling the socket or inserting anything into it.

Look at the cable and plug only from a dry position; do not move a heavy machine or pull on the cable. If a protective device has tripped, read the guide to electrical trips rather than resetting it repeatedly.

Bosch lists the power supply and door among the causes of a machine not starting in its troubleshooting guide for start-up problems. In this case, the complete absence of indicators points first to the power supply; an active control panel that does not start the machine calls for a different diagnosis.

If the power supply is OK

The internal power supply, mains filter, connections or electronics should be checked using the relevant wiring diagram. Do not use an extension lead, adaptor or makeshift socket to get around a possible problem with the circuit.

If the socket has not been checked or the cable is damaged, have the electrical supply checked before attributing the lack of lights to the appliance.

View all articles in Electrical and heating faults in washing machines