The washing machine won’t turn on and shows no lights

A washing machine that is completely off may have no power supply or an internal power or control failure. A dark display alone does not prove that the control board is faulty.

First, rule out a dangerous situation

If you see water near electrical connections, burn marks, a damaged cord, or notice an electrical smell, do not plug the appliance in again. Disconnect power from a safe location and arrange for an inspection.

External checks

Check the power switch position and whether the installation has an accessible power switch. Check whether there was a known outage and which other areas lost power, without disassembling the outlet or inserting anything into it.

Look at the cord and plug only from a dry location. Do not move a heavy machine or pull on the cord. If a protective device has tripped, see the electrical tripping troubleshooting guide instead of resetting it repeatedly.

Bosch lists power and the door among the causes of a washer not starting in its troubleshooting guide for start-up problems. In this case, the complete absence of indicators points first to a power supply issue; an active panel that does not start calls for a different diagnosis.

If the power supply is working

The internal power supply, line filter, connections, or electronics should be checked using the applicable wiring diagram. Do not use an extension cord, adapter, or makeshift outlet to work around a possible circuit problem.

If the outlet has not been verified or the cord is damaged, have the electrical issue addressed before attributing the lack of lights to the appliance.

View all articles in Electrical and heating faults in washing machines